Bottom Brackets

Thread together BB for 386EVO frames and 24mm diameter spindle cranks. Machined aluminum cups thread together for stability, increased bearing life, and simple installation and maintenance. No more creaking. Smooth operation. Fast bearing replacement. - Bearings: Enduro ABEC-3 - Bottom Bracket/Frame Interface: BB386EVO, BB392EVO - Bottom Bracket Shell Width (mm): 86mm - 92mm - Bottom Bracket Shell I.D.: 46mm - Crank Spindle Diameter: 24mm - Over Bearing Width: 91.5mm in 86.5mm wide shell - Over Bearing Width Dimensions include supplied silicone dust shields - Weight: 133g Compatible with the following Bottom Bracket Standards (46mm BB shell ID, 86 – 92mm wide BB shell) and 24.00mm diameter spindle cranks: - BB386EVO - BB392EVO

T47 threaded BB cups for running 30mm spindle cranks in T47 frames. Cups have internal bearings and are typically used in BB shells with widths wider than 73mm. Machined aluminum cups thread together directly into a T47 BB shell. Bearings are easily serviced or replaced. Includes sleeve to fit between cups for added protection from dirt and grime, and also keeps your internal wires and hoses from rubbing on the crank spindle. T47 BB cups are similar to standard BSA threaded cups in that the drive side cup is left-hand thread and the non-drive side cup is right-hand thread. Use a quality grease when installing in steel or aluminum BB shells, or a titanium-compatible anti-seize compound in titanium BB shells. - Bearings: Enduro Angular Contact - Bottom Bracket/Frame Interface: T47 - Bottom Bracket Shell Width: 68mm – 132mm - Bottom Bracket Shell I.D.: 47x1.0mm Threaded - Over Bearing Width: 91.7mm in 86.5mm wide shell (dimensions include supplied silicone dust shields) - Tool Pattern: 48.5mm x 16-notch

- One-piece bottom bracket cup set - Bearings included - Shell: 68mm - Spindle Type: OPC - Cup Material: Steel - Weight: 265 grams

- Steel body - Steel cups - Chromoly spindle - Sealed bearings - Interface: English - Square Taper JIS - Weight: 305-320 grams

Shimano BB-ES300 Octalink V2 Bottom Brackets - Fits Shimano Octalink V2 Spline Cranksets - Crankarm fixing bolts not included

- Tiagra-level Hollowtech II bottom bracket - Compatible with all road Hollowtech II cranks

The SRAM DUB bottom bracket series has a simple job— to connect crankarms and protect the smooth, long-lasting application of power to the drivetrain. SRAM engineered the oversized DUB spindle to work across every bottom bracket standard, simplifying crankarm compatibility. - Gutter Seal Technology drastically improves sealing against the elements - Sealed cartridge bearings - One oversized spindle to work across every bottom bracket standard - Significantly lighter than GXP system

The SRAM DUB bottom bracket series has a simple job—to connect crankarms and protect the smooth, long-lasting application of power to the drivetrain. SRAM engineered the oversized DUB spindle to work across every bottom bracket standard, simplifying crankarm compatibility. - Gutter Seal Technology drastically improves sealing against the elements - Sealed cartridge bearings - One oversized spindle to work across every bottom bracket standard

The new SRAM DUB bottom bracket series has a simple job—connect your crankarms and protect the smooth, long-lasting application of power to your drivetrain. To allow that singular focus, we’ve engineered the DUB spindle to be the one true unifying component. One oversized spindle to work across every bottom bracket standard. For better crankarm compatibility. For better protection from the elements. For longer-lasting performance. To be stronger, smoother, simpler. Now, back to the ride. - One oversized spindle to work across every bottom bracket standard. - Significantly lighter than PFGXP system - Easier installation by allowing you to press the bearing cups into the frame - Easy installation - Two fully sealed cartridge bearings - ISO 4210 compliant. See Declaration of Conformity for details. - BB-frame interface PressFit (Road: 86.5mm) - Crank-BB interface DUB - Bearing type Standard - Spindle diameter DUB - Cup material Steel

SRAM saw the opportunity to make a better press fit system where all the best from BB30 and PressFit bottom brackets would be combined into one captivating package. Pressfit 30 will feature an integrated seal, pre-assembled into the cups, to further prolong bearing life. The key difference with Pressfit 30 is how the bearings are fitted into the frame. Bearings are housed in nylon cups which will be pressed into the frames bottom bracket shell. This bottom bracket is designed for 30mm spindle cranksets. Frames will need a 46mm inner-diameter bottom bracket shell to accommodate this system. Pressfit 30 for road will require a 68mm wide shell while Pressfit 30 for MTB will require a 73mm wide shell. - Easy installation - PressFit cups for lighter weight - Narrow Q-factor and more ankle clearance - Integrated gutter seal to prolong life - Integrated adjuster - 30mm spindle diameter

Race Face bottom brackets for use with 30mm spindle cranksets in the Race Face CINCH crank family. - Compatible with standard threaded BSA shells - Standard 6806 retainer bearings - Includes inner plastic sleeve and spacer; additional BB fitments can be accommodated with CINCH spacer kits - Inner sleeve protects against water - Rubber seal located on the bearing's external side helps to reduce the risk of water penetration

- Thread-together bottom brackets provide a secure and stable shell interface for smoother operation and extended bearing life - Hybrid AL6061/Nylon fiber cups for a superior fit and noise-free operation - Low-friction dual seals protect the bearings from harmful contaminants - Sealed premium bearings are both serviceable and replaceable - Designed for installing SRAM DUB 28.99mm spindle cranks into BB30 frames - Shell: 68/73mm x 42mm - Interface: BB30 - Spindle Type: SRAM DUB 28.99mm - Cup Material: AL6061/Nylon Fiber - Weight: 120g

Forged and CNC machined AL6061 cups - Double sealed replaceable bearings - Fits 68mm and 73mm shell widths - 1.37" x 24T English thread - Alloy spacers included for chainline adjustment - Anodized and laser etched finish

- Enables the use of a BB386EVO (30mm spindle) crankset on a 68mm English threaded frame

FSA PowerPro JIS Cartridge Bottom Brackets. - Includes bolts - Spindle Interface Type: Square Taper JIS - BB Shell Width (mm): 68 - BB/Frame Interface: English

- For 19mm crank spindles and Euro bottom bracket frames - Sealed quad bearing design with alloy cups - Shell: Euro - Interface: English - Spindle Type: 19mm

- Compatible with both American and Mid style BB shells - 6061-T6 full CNC alloy construction - Anodized surface finish - Weight: 255g - Cup Type: Press Fit - Cup OD/Bearing OD: 41mm or 51mm

- Bottom brackets for e*thirteen XCX, TRS, and LG1 cranks. Also compatible with older Fifteen.G cranks (requires spacer and wave washer kit) - 7075-T6 black anodized cups with custom angular contact bearings - One year no questions ask - Model: EXA+ - Interface: P3 Connect - Shell: English - For installation of BSA bottom brackets, use e*thirteen BB tool (included with cranksets) or a 1-3/4" 12 point socket

- Adapts ISCG-05 mount chainguide arms to fit flange or lockring style bottom brackets

Thread together BB for 386EVO frames and 29mm spindle diameter SRAM DUB compatible cranks. Machined aluminum cups thread together for stability, increased bearing life, and simple installation and maintenance. No more creaking. Smooth operation. Fast bearing replacement. Bottom Bracket Includes: - BB Cups with bearings - 2x Silicone dust seals - 2x 0.5mm crank spindle spacers - 2x 1.0mm crank spindle spacers - 1x 2.5mm crank spindle spacer - Bearings: Enduro ABEC-3 - Bottom Bracket/Frame Interface: BB386EVO, PF30/83 - Bottom Bracket Shell Width (mm): 83mm - 92mm - Bottom Bracket Shell I.D.: 46mm - Crank Spindle Diameter: 29mm - Over Bearing Width: 86.5mm in 86.5mm wide shell - Over Bearing Width Dimensions include supplied silicone dust shields - Weight: 126g Compatible with the following Bottom Bracket Standards (46mm BB shell ID, 86 – 92mm wide BB shell) and 29mm diameter spindle SRAM DUB compatible cranks: - BB386EVO - BB392EVO - BBRIGHT - PF30 with 83mm wide BB shell (downhill)

Thread together BB for 386EVO frames and 22/24mm diameter spindle cranks. Machined aluminum cups thread together for stability, increased bearing life, and simple installation and maintenance. No more creaking. Smooth operation. Fast bearing replacement. - Bearings: Enduro ABEC-3 - Bottom Bracket/Frame Interface: BB386EVO, BB392EVO - Bottom Bracket Shell Width (mm): 86mm - 92mm - Bottom Bracket Shell I.D.: 46mm - Crank Spindle Diameter: 22/24mm - Over Bearing Width: 91.8mm in 86.5mm wide shell - Over Bearing Width Dimensions include supplied silicone dust shields - Weight: 145g Compatible with the following Bottom Bracket Standards (46mm BB shell ID, 86 – 92mm wide BB shell) and 22/24mm diameter spindle cranks: - BB386EVO - BB392EVO

The Wheels Mfg BB30 Outboard bottom bracket will give you all of the same benefits as their other Outboard style BBs. The two machined aluminum cups thread together ensuring the bottom bracket remains stable in the frame, increasing bearing life, and simplifying maintenance. This means no more creaking, smoother operation, longer bearing life, and really quick bearing replacement. Specifically designed for installing 24mm spindle diameter cranks (Shimano, FSA, Etc.) in BB30 frames without the need for adapters. - Bearings: Enduro ZERØ Ceramic - Color: Red - Bottom Bracket/Frame Interface: BB30, Specialized Alloy OSBB - Bottom Bracket Shell Width (mm): 68mm - 73mm - Bottom Bracket Shell I.D.: 42mm - Crank Spindle Type: Shimano Hollowtech II, FSA MegaExo, RaceFace EXI - Crank Spindle Diameter: 24mm - Weight: 122g

The two machined aluminum cups thread together ensuring the bottom bracket remains stable in the frame, increasing bearing life and simplifying maintenance. Enjoy smooth operation, fast bearing replacement, and no more creaking. - Bearings: Enduro ABEC-3 - Color: Black - Bottom Bracket/Frame Interface: Cannondale BB30A - Bottom Bracket Shell Width: 73mm - Bottom Bracket Shell I.D.: 42mm - Over Bearing Width: 91mm in 73mm wide shell (dimensions include supplied silicone dust shields) - Tool Pattern: 44mm x 16 notch

The two machined aluminum cups thread together ensuring the bottom bracket remains stable in the frame, increasing bearing life and simplifying maintenance. Enjoy smooth operation, fast bearing replacement, and no more creaking. - Bearings: Enduro Angular Contact (22/24mm SRAM non-drive-side bearing: ABEC-3) - Color: Black - Bottom Bracket/Frame Interface: Cannondale BB30A - Bottom Bracket Shell Width: 73mm - Bottom Bracket Shell I.D.: 42mm - Over Bearing Width: 91mm in 73mm wide shell (dimensions include supplied silicone dust shields) - Tool Pattern: 44mm x 16 notch

The two machined aluminum cups thread together ensuring the bottom bracket remains stable in the frame, increasing bearing life and simplifying maintenance. Enjoy smooth operation, fast bearing replacement, and no more creaking. - Bearings: Enduro Angular Contact - Color: Black - Bottom Bracket/Frame Interface: Cannondale BB30A - Bottom Bracket Shell Width: 73mm - Bottom Bracket Shell I.D: 42mm - Over Bearing Width: 91mm in 73mm wide shell (dimensions include supplied silicone dust shields) - Tool Pattern: 44mm x 16 notch

Thread together bottom bracket for frames using the BBRight bottom bracket standard and 30mm spindle diameter cranks. Two machined aluminum cups thread together keeping the bottom bracket stable in the frame, increasing bearing life, and simplifying maintenance. This means no more creaking, smoother operation, longer bearing life, and really quick bearing replacement. Bottom Bracket Includes: - BB Cups with bearings - 2x - Silicone dust seals - 2x - 0.5mm crank spindle spacers - 2x - 1.0mm crank spindle spacers - Bearings: Enduro ABEC-3 - Bottom Bracket/Frame Interface: BBRight Press Fit - Bottom Bracket Shell Width: 79mm - Bottom Bracket Shell I.D.: 46mm - Crank Spindle Diameter: 30mm - Tool Pattern: 48.5mm x 16 notch - Over Bearing Width: 91.5mm in 79mm wide shell - Over Bearing Width Dimensions include supplied silicone dust shields - Weight: 146g

By popular demand, Wheels Mfg. added this PF30 Outboard Bearing BB for use with 30mm spindle cranksets when used in PF30 frames. The two machined aluminum cups thread together keeping the bottom bracket stable in the frame, increasing bearing life and simplifying maintenance. This means smooth operation, fast bearing replacement, and no more creaking. Note: Spindle length must be 103mm or longer when used in a 68mm wide shell; 108mm or longer when used in a 73mm wide shell. - Bearings: Enduro Angular Contact - Color: Black - Bottom Bracket/Frame Interface: PF30, Specialized Carbon OSBB - Bottom Bracket Shell Width: 61mm – 83mm (Specialized Carbon OSBB with 61mm shell width will need additional 3.5mm cup spacers, sold separately) - Bottom Bracket Shell I.D.: 46mm - Over Bearing Width: 89mm in 68mm wide shell (dimensions include supplied silicone dust shields) - Crank Spindle Diameter: 30mm - Tool Pattern: 48.5mm x 16 notch - Weight: 151g

The Wheels Mfg PF30 Outboard bottom bracket will give you all of the same benefits as their well-loved Outboard style BBs. The two machined aluminum cups thread together ensuring the bottom bracket remains stable in the frame, increasing bearing life, and simplifying maintenance. This means no more creaking, smoother operation, longer bearing life, and really quick bearing replacement. Specifically designed for installing 24mm spindle diameter cranks (Shimano, FSA, Etc.) in PF30 frames without the need for adapters. - Bearings: Enduro ZERØ Ceramic - Color: Red - Bottom Bracket/Frame Interface: PF30, Specialized Carbon OSBB - Bottom Bracket Shell Width (mm): 68mm - 73mm - Bottom Bracket Shell I.D.: 46mm - Crank Spindle Type: Shimano Hollowtech II, FSA MegaExo, RaceFace EXI - Crank Spindle Diameter: 24mm - Weight: 156g

PF30 Threaded bottom bracket features two machined aluminum cups that thread together ensuring the bottom bracket remains stable in the frame, increasing bearing life, and simplifying maintenance. This means no more creaking, smoother operation, longer bearing life, and really quick bearing replacement. Directly replaces all OEM PF30 bottom brackets. Note: Use only bottom bracket tools compatible with 16-notch, 48.5mm outer diameter cups. - Bearings: Enduro ABEC-3 - Color: Black - Bottom Bracket/Frame Interface: PF30, Specialized Carbon OSBB, BBRight™ Press Fit - Bottom Bracket Shell Width (mm): 61mm to 79mm - Bottom Bracket Shell I.D.: 46mm - Crank Spindle Type: BB30 - Crank Spindle Diameter: 30mm - Weight: 115g

Specifically designed for installing 22/24mm spindle diameter cranks (SRAM) in Cannondale PF30A (46mm ID, 73mm wide asymmetrical BB shell) frames without the need for any adapters. The two machined aluminum cups thread together ensuring the bottom bracket remains stable in the frame, increasing bearing life, and simplifying maintenance. Enjoy smooth operation, fast bearing replacement, and no more creaking. - Bearings: ABEC-3 - Color: Black - Bottom Bracket/Frame Interface: Cannondale PF30A - Bottom Bracket Shell Width: 73mm - Bottom Bracket Shell I.D.: 46mm - Over Bearing Width: 91mm in 73mm wide shell (dimensions include supplied silicone dust shields) - Tool Pattern: 44mm x 16 notch