Filter By:
- Bar Ends (15)
- BMX (79)
- Bottom Brackets (221)
- Brakes/Levers/Pads (700)
- Cables (208)
- Cassettes/Freewheels (136)
- Chainrings (297)
- Chains (150)
- Show More Categories
- Cranksets (298)
- Derailleurs (173)
- Forks (188)
- Groups (30)
- Handlebar Grips/Tape (364)
- Handlebars (277)
- Headsets (164)
- Pedals (362)
- Saddles (375)
- Seatposts (109)
- Shift/Brake Combinations (63)
- Shifters (132)
- Shocks (30)
- Stems (161)
- Other (1979)
- Show Fewer Categories
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
Parts

$16.99
iSSi's SPD cleats are perfect for all your SPD-compatible pedals. If your entry and exit isn't what it used to be, a cleat replacement is just what the bike doctor ordered.
- 4 degrees of float both inward and outward

$49.99
Built to handle the rigors of riding off-road, the concave shape and tall pins of the Thump composite pedal provide the perfect balance of traction and comfort for a range of applications. The Thump RP version comes with replaceable steel pins that provide solid traction when the trail gets hairy. Two different platform diameters accommodate a range of shoes sizes for a more personalized fit.
- Tough, nylon composite body
- Chromoly spindles, sealed cartridge bearings, and nylon bushings
- Body: 18.5mm thick with 2.5mm of concavity for great control and comfort
- Pin height: 3mm out of the box. Remove the 2mm washer under the pin head to convert to 5mm pin height.
- Platform size: 119 x 99mm

$19.99
absoluteBLACK Chainring Bolts are used to mount chainrings to the crank arms. Bolts are crafted from 7075 T6 aluminum and hard anodized for durability.
- Bolts use a Torx T30 interface for greater reliability
- Short bolts are used for the following chainrings: 104 BCD oval 34/36t, 104 BCD round 32/34/36/38t, and bashrings
- Set of 4

$24.99
absoluteBLACK Chainring Bolts are used to mount chainrings to the crank arms. Bolts are crafted from 7075 T6 aluminum and hard anodized for durability.
- Bolts use a Torx T30 interface for greater reliability
- Short bolts are used for the following chainrings: 104 BCD oval 34/36t, 104 BCD round 32/34/36/38t, and bashrings
- Set of 5

$69.99 - $78.99
absoluteBLACK Oval 104/64 BCD Chainrings greatly improve traction and climbing abilities. They are designed for use with all cranksets with a 104/64 BCD interface, including Shimano, SRAM, Race Face, FSA, and more. These chainrings allow you to run a 1x system without chain retention issues. The specially designed narrow-wide tooth profile keeps the chain snug, allowing you to leave your chain keeper in the garage. They are crafted from CNC machined 7075 aluminum and feature an anodized finish for exceptional durability. Ovality has been optimized for each chainring size, ranging from 10.2-14.4%, with timing of 110.5-116.3° after TDC (top dead center).
- Oval shape reduces stress on knees, helps to keep your legs fresh, and does not feel any different while riding
- The unique, patent-pending narrow-wide tooth profile keeps the chain in place
- Teeth have been 3D-machined for ultimate mud shedding and quieter operation
- Provides excellent weight-to-strength ratio
- 9, 10, 11, and 12-speed Eagle compatible

$83.99
absoluteBLACK Oval 110 BCD 1x Chainrings for Cyclocross greatly improve traction for CX or gravel riding. They are designed for all Shimano 4-bolt cranks such as Dura-Ace 9100, 9000, Ultegra 8000, 6800, and more. The specially designed narrow-wide tooth profile keeps the chain snug, allowing you to leave your chain keeper in the garage. They are crafted from CNC machined 7075 aluminum and feature an anodized finish for exceptional durability. Ovality has been optimized for each chainring size, ranging from 10.5-11.4%, with timing of 112-113° after TDC (top dead center).
- Oval shape reduces stress on knees, helps to keep your legs fresh, and does not feel any different while riding
- Teeth have been 3D-machined for ultimate mud shedding and quieter operation
- The unique, patent-pending narrow-wide tooth profile keeps the chain in place
- Provides excellent weight-to-strength ratio
- 12-Speed Eagle compatible
- Chainring bolts are included

$79.99 - $139.99
absoluteBLACK Oval Direct Mount 1x Chainrings for CINCH greatly improve traction and climbing abilities. They are designed for Race Face cranks that utilize the CINCH system. Direct mount chainrings provide significant weight savings over a standard spider and chainring combination. They are crafted from CNC machined 7075 aluminum and feature an anodized finish for exceptional durability. Ovality has been optimized for each chainring size, ranging from 10.2-14.4%, with timing of 110.5-116.3° after TDC (top dead center).
- Oval shape reduces stress on knees, helps to keep your legs fresh, and does not feel any different while riding
- The unique, patent-pending narrow-wide tooth profile keeps the chain in place
- Teeth have been 3D-machined for ultimate mud shedding and quieter operation
- Provides excellent weight-to-strength ratio
- 3mm offset is designed for bikes with Boost spacing and fat bikes (when reversed)

$83.99
absoluteBLACK Oval Direct Mount 1x Chainrings for CINCH greatly improve traction and climbing abilities. They are designed for Race Face cranks that utilize the CINCH system. Direct mount chainrings provide significant weight savings over a standard spider and chainring combination. They are crafted from CNC machined 7075 aluminum and feature an anodized finish for exceptional durability. Ovality has been optimized for each chainring size, ranging from 10.2-14.4%, with timing of 110.5-116.3° after TDC (top dead center).
- Oval shape reduces stress on knees, helps to keep your legs fresh, and does not feel any different while riding
- The unique, patent-pending narrow-wide tooth profile keeps the chain in place
- Teeth have been 3D-machined for ultimate mud shedding and quieter operation
- Provides excellent weight-to-strength ratio
- 6mm offset for standard 49mm chainline

$74.99
The Taco Bashguard is designed to protect your chainring from obstacles like logs or rocks. It is hidden behind the crank and mounted to ISCG05 tabs that are located around your bottom bracket. It offers great protection for both oval and round chainrings, especially direct mount rings that cannot mount to a standard 4-bolt bashring. The Taco Bashguard fits up to a 32T oval chainring or 34T round one.
- The Taco Bashguard can be used with any chainring from 26T-32T oval or 26T-34T round
- Box includes taco bashguard (assembled), 6 x 1mm spacers, 3 x 3mm spacers, 3x 16mm stainless bolts, and 1 x 12mm stainless bolt
- Weight: 56g

$49.99 - $79.99
This chain uses 3 surface treatments for a long lasting and smooth running chain. Compared with standard bicycle chains the lifespan is expected to be double your standard mileage.
- DHA hardening for a service life up to 8000 km/4900 miles
- Ni-PFTE treated to reduce friction
- Ti-Nitride coating provides a durable and long lasting finish
- Chamfered inner and outer plates to smooth out and reduce shifting effort
- Includes one QRS reusable master link and one traditional chain pin
- Laser cutouts and hollow pins to reduce weight
- Links (links): 116
- Color: Black
- Width: 5.9 mm
- Drivetrain Speeds: 10
- Chain Connection Type: Reusable Master Link
- Weight: 242 g

$199.99 - $219.99
The X-Fusion Manic post uses internal cable routing and was designed around a low-profile seat cradle and seal collar to fit a broad range of frames. The mechanism is air-sprung and hydraulically locked. The remote can be run on the left or right, above or below the handlebar, but is optimized as a left shifter replacement for 1x drivetrains.
- Cable activated, hydraulic action, infinitely adjustable travel
- Double key-way design prevents lateral twisting
- Double bolt clamp with a wide range of seat angle adjustment. Fits both standard and 7 x 9 mm Carbon Rails
- Sealed cartridge internals for quick replacement
- Low profile head-seal and saddle clamp increase useable travel

$79.95 - $89.99
The perfect 1x solution for your gravel, CX or road bike. Made from 7075 Aluminum, Wolf Tooth's patented Drop-Stop design helps clear mud while retaining your chain.
- Features Wolf Tooth's Drop-Stop tooth design for maximum chain retention
- Drop-Stop chainrings are designed for use with 1x9, 1x10, 1x11 and 1x12 drivetrains
- Drop-Stop FT is compatible with all 10-, 11-, and 12-speed chains (including SRAM Flattop 12-speed chains), with the exception of Shimano 12-speed chains
- Shimano 12-speed chains require the use of Wolf Tooth's Shimano 12-speed specific chainrings
- If using a 9-speed drivetrain, use a 10-speed chain, which will provide a tighter fit for better chain retention
- Not compatible with Shimano Asymmetric 110 BCD cranks or Campagnolo CX10/11 cranks
- Use of a clutch-style rear derailleur is recommended
- Made from 7075-T6 aluminum for long life

$49.95 - $54.99
CAMO is all about choice - these aluminum alloy rings are made from 7075 Aluminum Alloy for lightweight performance. Only compatible with CAMO spiders.
- Requires the use of a CAMO Spider
- Features Wolf Tooth's Drop-Stop tooth design for maximum chain retention
- Drop-Stop chainrings are designed for use with 1x9, 1x10, 1x11 and 1x12 drivetrains
- Compatible with all 10-, 11-, and 12-speed chains, with the exception of Shimano 12-speed chains
- Shimano 12-speed chains require the use of Wolf Tooth's Shimano 12-speed specific chainrings
- If using a 9-speed drivetrain, use a 10-speed chain, which will provide a tighter fit for better chain retention
- Made from 7075-T6 aluminum for long life

$76.95
The direct mount chainrings for SRAM cranksets replace your existing spider and chainring with one clean-looking, lightweight, and stiff piece of machined billet. Wolf Tooth patented Drop-Stop wide/narrow tooth profile for the ultimate chain retention and mud-shedding ability.
Compatibility
These direct mount chainrings will replace your existing chainring and spider or replace the direct mount ring on SRAM cranksets, including the DUB cranks. The ring is attached via 3 bolts on the back side of the spider near the spindle. Note that the SRAM 12spd Red and Force AXS use a different 8-bolt mounting interface that is not compatible with these chainrings.
Specifications:
- Boost: 3mm offset for 52mm chainline
- Mount type: Direct Mount for SRAM
- Offset: Boost
- Chain Compatibility: Drop-Stop A tooth profile for all 9, 10, and 11spd chains or 12spd SRAM Eagle, KMC, Connex or Wippermann chains

$76.95 - $84.99
Designed for Race Face CINCH cranks with removable spiders. This chainring features the patent pending asymmetrical Drop-Stop tooth design for the best in wear life, mud clearance, and chain retention.
- Drop-Stop chainrings are designed for use with 1x9, 1x10, 1x11 and 1x12 drivetrains
- Drop-Stop FT is compatible with all 10-, 11-, and 12-speed chains (including SRAM Flattop 12-speed chains), with the exception of Shimano 12-speed chains
- Shimano 12-speed chains require the use of Wolf Tooth's Shimano 12-speed specific chainrings
- If using a 9-speed drivetrain, use a 10-speed chain, which will provide a tighter fit for better chain retention
- Made from 7075-T6 aluminum for long life
- Use of a clutch-style rear derailleur is recommended

$59.99
Wolf Tooth Premium headsets are machined out of aircraft grade aluminum and feature high-end bearings made by Enduro. They are engineered to use the largest possible ball size and are filled with high-pressure waterproof lubricant. A pair of dual-lip seals ride in micro-grooves to keep out water and debris.
- Stainless Steel Bearings provide unparalleled corrosion resistance
- Highly recommended if your headset will be exposed to wet conditions or sweat
- Lifetime warranty

$29.99
The precision-engineered Wolf Tooth Seatpost Clamp secures your seatpost and looks good doing it. At the heart of the Wolf Tooth Seatpost Clamp is a custom self-aligning bolt and anchor. The M5 bolt includes spherical washer and mates with a cylindrical anchor barrel. This means that threads are always perfectly aligned, preventing binding and ensuring consistent clamping force.
- M6 stainless steel bolt with integrated washer
- Tool interface - 4mm hex key
$48.00
Whisky's No.7 Mountain stems offer a stout connection for modern mountain bars. They match the simple, clean aesthetic of other Whisky cockpit components.
- Bead-blasted, then anodized, finish
- 3D-forged for increased strength, then CNC-machined
- 4-bolt faceplate design for easy installation

$15.95
Shims for fitting 25.4mm diameter handlebars to 31.8mm clamp diameter stems. - Outside Diameter: 31.8mm - Inside Diameter: 25.4mm - Length: 48mm - Machined Aluminum - Anodized Black

$118.65
Thread together BB for 386EVO frames and 24mm diameter spindle cranks. Machined aluminum cups thread together for stability, increased bearing life, and simple installation and maintenance. No more creaking. Smooth operation. Fast bearing replacement.
- Bearings: Enduro ABEC-3
- Bottom Bracket/Frame Interface: BB386EVO, BB392EVO
- Bottom Bracket Shell Width (mm): 86mm - 92mm
- Bottom Bracket Shell I.D.: 46mm
- Crank Spindle Diameter: 24mm
- Over Bearing Width: 91.5mm in 86.5mm wide shell
- Over Bearing Width Dimensions include supplied silicone dust shields
- Weight: 133g
Compatible with the following Bottom Bracket Standards (46mm BB shell ID, 86 – 92mm wide BB shell) and 24.00mm diameter spindle cranks:
- BB386EVO
- BB392EVO

$47.25
BB30 service kit includes 2 Enduro 6806 ABEC-3 sealed bearings and 2 retaining clips. - Bearing Dimensions: OD: 42mm / ID: 30mm / Width: 7mm - Direct replacement bearing for OEM BB30 and BB30A systems - Enduro ABEC-3 bearings

$21.22
Enduro 24X37 ABEC-3 Sealed Bearing. Replacement bearing for Wheels Mfg bottom brackets for 24mm (Shimano) and 22mm/24mm (SRAM GXP) spindle cranks.
ABEC-3 bearings are the most economical bearing Enduro offers but are extremely tough and durable.
Grade 10 chromium steel balls are within 10/1,000,000" round. These are twice as round as the industry standard. 52100 high carbon chromium alloy races go through a vacuum de-gassing process resulting in the purest chromium alloy steel, hardened to R-62. Keeping everything together are riveted steel retainers and sealed with LLB type seals.
- Dimensions: OD: 37mm / ID: 24mm / Width: 7mm
- ABEC-3 - Grade 10, 5/32" chromium steel balls
- Enduro Part # BB MR 2437 LLB-BLK
- Imported
- Sold in a bag of 2

$141.99
T47 threaded BB cups for running 30mm spindle cranks in T47 frames. Cups have internal bearings and are typically used in BB shells with widths wider than 73mm. Machined aluminum cups thread together directly into a T47 BB shell. Bearings are easily serviced or replaced. Includes sleeve to fit between cups for added protection from dirt and grime, and also keeps your internal wires and hoses from rubbing on the crank spindle. T47 BB cups are similar to standard BSA threaded cups in that the drive side cup is left-hand thread and the non-drive side cup is right-hand thread. Use a quality grease when installing in steel or aluminum BB shells, or a titanium-compatible anti-seize compound in titanium BB shells. - Bearings: Enduro Angular Contact - Bottom Bracket/Frame Interface: T47 - Bottom Bracket Shell Width: 68mm – 132mm - Bottom Bracket Shell I.D.: 47x1.0mm Threaded - Over Bearing Width: 91.7mm in 86.5mm wide shell (dimensions include supplied silicone dust shields) - Tool Pattern: 48.5mm x 16-notch

$24.99
Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance.
- OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application.
- These hangers DO NOT INCLUDE attachment hardware with the exception of QBP # FS1561 (DROPOUT 399)
- CNC machined 6061 aluminum
- Made in the USA

$27.99
Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance.
- OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application.
- These hangers DO NOT INCLUDE attachment hardware with the exception of QBP # FS1561 (DROPOUT 399)
- CNC machined 6061 aluminum
- Made in the USA

$29.99
Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance.
- OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application.
- These hangers DO NOT INCLUDE attachment hardware with the exception of QBP # FS1561 (DROPOUT 399)
- CNC machined 6061 aluminum
- Made in the USA

$24.99
Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance.
- OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application.
- CNC machined 6061 aluminum
- Black anodized finish
- Made in the USA
Page 1 of 210
Next page