Shop Snow Sports

Transparent polyethylene sticks for repairing ski bases. Easy to work with. Ø 6 mm. 4 sticks per pack. First clean the damaged area in the base and scrape out any loose residue. Heat the polystick and drip into the damaged area in the base. Let it cool down and scrape away the excess with a steel scraper, or panzer file if necessary, and polish over with Fibertex for a fine finish. - Polyethylene Stick - For repairing ski bases - For racing service and ski workshops - Easy to work with

Transparent polyethylene sticks for repairing ski bases. Easy to work with. Ø 6 mm. 4 sticks per pack. First clean the damaged area in the base and scrape out any loose residue. Heat the polystick and drip into the damaged area in the base. Let it cool down and scrape away the excess with a steel scraper, or panzer file if necessary, and polish over with Fibertex for a fine finish. - Polyethylene Stick - For repairing ski bases - For racing service and ski workshops - Easy to work with

Roof rack security or apres ski piece-of-mind, the Micro Lock provides gear security in a pocket-size package. Built from the same bomber materials as the larger Cool Lock, the Micro features a 30-inch cable and three-digit combo lock. Just enough security to offer a peace-of-mind for your unattended skis or board. - Compact 3-digit combination lock with 30-inch [ 76cm ] retractable cable - Set your own combination

Used primarily for removing burrs and rounding steel edges at the front/rear area of alpine skis and snowboards.

PS10 is an economic training and racing wax as well as base prep wax for warm skis. Easy to melt and very convenient to work with. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. It's important to have a good iron to get an efficient melting of the wax. Recommended iron temp: 120°C (248°F). - A versatile wax for warm conditions - Low melting point and easy to apply

The Kids' Wintersport Full Cushion Yeti Pattern Over The Calf Socks are the perfect winter accessory for the tiny adventurer in your life. This cozy Merino wool sock features a playful yeti design, full cushion, and a flat knit toe seam for additional comfort. With these over-the-calf socks on their side, they can focus more on exploring and less on staying warm. - Made in USA - Over-the-Calf - Full Cushion

Get them ready for a full day of exploring in the Kids' Wintersport Full Cushion Polar Bear Pattern Over The Calf Socks. This cozy Merino wool sock features a playful polar bear design, full cushion, and a flat knit toe seam for additional comfort. Snow days just got a little warmer and a lot more fun. - Sock Height: Over-the-Calf - Sock Cushion: Full Cushion - Full cushion in leg and foot - Flat knit toe seam for additional comfort

From snowball fights to ski slopes, the Kids' Wintersport Full Cushion Ski Day OTC Socks are a must-have for any snow day. Keep your little ones warm and cozy with this technical kids' ski sock, featuring full cushion and a flat knit toe seam for additional comfort. Now they can play longer and make even more memories with the warmth and support of Merino on their side. Features: - Sock Height: Over-the-Calf - Full cushion for extra comfort and durability - Flat knit toe seam for additional comfort - Made in the USA of Imported Yarn: 63% Merino Wool 7% Nylon 28% Recycled Nylon 2% Elastane *Specific percentage of Recycled Nylon will vary as we transition to 100% Recycled Nylon in future seasons.

No cushion. All performance. Our thinnest Merino wool ski socks are the perfect pairing for your tight-fitting ski boots, and still offer you the all-day comfort you need to stay out longer. Featuring our most loved sock technologies for an enhanced fit and durability, our Ski Zero Cushion Over The Calf Socks are everything you need to help take care of your feet and stay focused on the runs ahead. - 4 Degree Elite Fit System, Indestructawool Technology, Made in USA, Shred Shield Technology - Over-the-Calf - Zero Cushion

Breathe easy. Bringing together smooth Merino Wool feel, next-to-skin fit, flex and fatigue-zapping arch support, and targeted venting—the ultra-lightweight RFL is the sock experience your hard-charging feet have been dying for, lap after lap. Features - Performance Fit: No slipping, no bunching, and no blisters. - Fine-Gauge Knitting: Unprecedented durability and our unique "put it on, forget it's on" feel. - Fast-Action Wicking: Pulls moisture away from skin. Fast-drying. - All-Weather Performance: Cool in the summer, warm in the winter. - Naturally Antimicrobial: Repels bacteria and odor. - Guaranteed For Life: No strings. No conditions. For life. - Merino Wool is fast-drying, breathable and odor-resistant for all-day comfort. - True Seamless: Undetectable seam fusion for an ultra-smooth, invisible feel. Specs - Over the calf: the name says it all. The ultimate height for keeping the outside, out. - 55% Nylon 42% Merino Wool 3% Lycra Spandex - Our ultra-lightweight ski and snowboard socks guarantee the best boot fit for comfort and performance. Cushioning Details - Streamlined, low-profile ski and snowboard socks with no cushion provide the ultimate performance boot fit.

Hitting the slopes just got a lot more comfortable with our Women's Ski Targeted Cushion OTC Socks. These Merino ski socks feature our most advanced Indestructawool™ technology for enhanced durability and our 4 Degree™ elite fit system for an unmatched performance fit. Plus, body-mapped mesh zones for added breathability. Take on your next ski day with confidence and comfort with these next-level performance socks. Features: - Sock Height: Over-the-Calf - Indestructawool™ Technology for enhanced durability - 4 Degree™ Elite Fit System for a dialed-in, performance-oriented fit - Body-mapped mesh zones for added breathability - Wider welt for secure fit and comfort - Virtually Seamless™ toe for enhanced comfort - Women's specific fit: narrower heel and slimmer fit - Made in the USA of Imported Yarn: 57% Merino Wool 10% Nylon 30% Recycled Nylon 3% Elastane *Specific percentage of Recycled - Nylon will vary as we transition to 100% Recycled Nylon in future seasons.

No one likes wet boots and socks! The Tubbs full length nylon gaiters provide protection from the elements by keeping snow out of your boots and off of your pants. Water-resistant and breathable, these gaiters keep your feet comfortable and dry on those cold, wet winter hikes.

No one likes wet boots and socks! The Tubbs fulllength nylon gaiters provide protection from the elements by keeping snow out of your boots and off of your pants. Water-resistant and breathable, these gaiters keep your feet comfortable and dry on those cold, wet winter hikes.

A thin, breathable, and moisture-transporting liner, made of polyester and wool fabric. Primarily used as a base liner for gloves during the winter season, but can also be used as a thin glove for running, hiking, or other activities. Outer Material: 78% Polyester, 22% Wool tricot Details - Eyelet - Machine washable - Conductive

Durable, lightweight, and comfortable in smaller hands, Kaloo is ready for any jr ski day. Strong - Aluminum provides strength and stiffness Junior Ergonomy - The right size and shape grip to fit kids hands Lightweight - High-quality aluminum shaft is strong and light Kids basket - Smaller basket tailored to kids.

The Traverse Over-the-Calf snow sock, inspired by Michelle Parker, is designed to join you in your pursuit of pow. Whether you're inbounds or just a short boot-pack away, cushioned comfort and durability, shin padding and reinforced Achilles, plus ventilated zones on top yield a hard-working sock for the hardest working skier that craves the hardest-hitting zones on the mountain. Or it's just a warm winter sock. Your choice. - 52% Nylon 43% Merino Wool 5% Lycra Spandex

High-end junior pole for teenagers. Brigade Jr graphics match Salomon Junior skis. Strong: - Aluminum provides strength and stiffness Lightweight: - High quality aluminum shaft is strong and light Rocker² Jr graphics: - Colors match junior ski graphics

The Biogel Themo II cold weather cycling glove is made of a Drytex Thermal DWR material upper and synthetic leather on the palm. Garneau’s patented Ergo Air ventilation helps prevent clamminess when the palms start to sweat where the glove meets the bar. Patented Biogel progressive padding dampens vibrations and cushions the grip while riding. An outer microfibre backing on the index and thumb are designed for wiping away sweat. The long fitted spandex uff creates a snug, comfortable fit, and stops air from sneaking in. This glove offers the same features as the men’s version. It differs only by a more petit-fit, and pink accents in the patented Ergo-Air zone instead of red. - Patented Biogel 2 progressive padding 3 and 5 mm - Microfiber thumb - Long fitted spandex cuff for snug fit - Tactile index finger - Patented Ergo Air® X-Vent ventilation - Reflective accents

Protects the wax base during transport and is easy to prepare for the next training session. A versatile hard glide wax. Used by Racing Service and ski factories as a transport wax and as an effective preparation for the next summer snow training session. - Easy to apply with a waxing iron. - Easy to scrape and brush. - Fluoro-free

Available in different color combinations, the Atomic AMT is a seriously hardy ski pole with a 60mm piste basket and our Ergonomic AMT Grips – designed for all-mountain skiing with special ridges for an improved grip. The pole itself is made from a lightweight aluminum alloy, keeping it looking great and performing perfectly year after year. TECH FEATURES - 3* Aluminum Pole Technology - Ergonomic AMT Grip (1K) - Essential Strap - Piste Basket (60mm) - Steel Tip - Ergonomic M-Fit

From corduroy groomers to fast laps in the mini-park, kids will be able to count on the Buster's many features. And, with so many color and graphic options to choose from, the only hard part might be figuring out which option to go with. DETAILS BIG KID STYLE Help your little shredder learn the ropes of the slopes when they wear the new Buster goggle. They'll love the look and feel of these stylish mid-sized frames, and the cylindrical injection-molded lens with Expansion View Technology deliver clear and wide vision all season long. The Buster's triple-layer face foam with microfleece facing delivers remarkable comfort while also safeguarding them from wind and cold.

Start 'Em Young Chico 2.0 delivers protection, comfort, and clear vision so you and your little ones can fully enjoy those days ripping the magic carpet, hopping on the chairlift for the first time, and linking those first few turns. Our dual lens features an anti-fog coating, and our cozy dual-layer face foam includes a microfleece lining to keep out the cold. We shape the frame for Seamless Compatibility with our Crue MIPS and Spur MIPS youth helmets. - INJECTION-MOLDED CYLINDRICAL LENSES—Injection-molding a cylindrical lens helps refine optics and minimize distortion that can occur in thermo-formed cylindrical lenses. - TRIPLE-LAYER FACE FOAM—Triple-layer face foam with microfleece facing - OTG FRIENDLY—Engineered specifically for bespectacled skiers and snowboarders, goggles that are OTG (Over-The-Glasses) feature a finely crafted interior with extra volume to accommodate prescription frames comfortably. Increased air volume inside the goggle keeps your vision crisp, clear, and fog-free.

With the new Chico 2.0, kick off a fun start to a lifetime on the mountain. Start 'Em Young Chico 2.0 delivers protection, comfort, and clear vision so you and your little ones can fully enjoy those days ripping the magic carpet, hopping on the chairlift for the first time, and linking those first few turns. Our dual lens features an anti-fog coating, and our cozy dual-layer face foam includes a microfleece lining to keep out the cold. We shape the frame for Seamless Compatibility with our Crue Mips and Spur Mips youth helmets. INJECTION-MOLDED CYLINDRICAL LENSES - Injection-molding a cylindrical lens helps refine optics and minimize distortion that can occur in thermo-formed cylindrical lenses. TRIPLE-LAYER FACE FOAM - Triple-layer face foam with microfleece facing OTG FRIENDLY - Engineered specifically for bespectacled skiers and snowboarders, goggles that are OTG (Over-The-Glasses) feature a finely crafted interior with extra volume to accommodate prescription frames comfortably. Increased air volume inside the goggle keeps your vision crisp, clear, and fog-free. SEAMLESS COMPATIBILITY - For optimal performance of both helmets and goggles, Giro products are designed to work together, ensuring a seamless interface between helmet and goggle for an exceptional fit and dependable, worry-free function. HIGHLIGHTS - PressFit Lens Interchange System - Cylindrical injection-molded lens - Over-the-glasses (OTG) friendly - Seamless Compatibility with Giro youth helmets (Crüe, Spur & Launch Plus)

The Cruz is an easy decision when you need a goggle that gets the job done without breaking the bank. This stylish, medium fit frame packs many of the features of goggles that cost three-times more, including Expansion View Technology for a wide field of view, anti-fog lens coating, and Seamless Compatibility with all Giro helmets. Plus, the silicone on the inside of the Cruz's goggle strap prevents slippage and ensures that it stays in place over your helmet or beanie. - Eyewear compatible: OTG-friendly - Frame: EXV frame design - Face foam: double-layer face foam with microfleece facing - Anti-fog coating

From corduroy groomers to fast laps in the mini park, kids will be able to count on the Buster's many features. And with so many color and graphic options to choose from, the only hard part might be figuring out which option to go with. Big kid style Help your little shredder learn the ropes of the slopes when they wear the new Buster goggle. They'll love the look and feel of these stylish mid-sized frames, and the cylindrical injection-molded lens with Expansion View Technology deliver clear and wide vision all season long. The Buster's triple-layer face foam with microfleece facing delivers remarkable comfort while also safeguarding them from wind and cold. EXPANSION VIEW (EXV) TECHNOLOGY - Perfected at Giro's test lab in Scotts Valley, California, this groundbreaking new frame design serves up unparalleled peripheral vision. We started with a helmet-compatible goggle, and then shaved down the frame rim and added frameless zones to optimize a massive spherical lens focused on the best possible peripheral vision in a goggle. INJECTION-MOLDED CYLINDRICAL LENSES - Injection-molding a cylindrical lens helps refine optics and minimize distortion that can occur in thermo-formed cylindrical lenses. OTG FRIENDLY - Engineered specifically for bespectacled skiers and snowboarders, goggles that are OTG (Over-The-Glasses) feature a finely crafted interior with extra volume to accommodate prescription frames comfortably. Increased air volume inside the goggle keeps your vision crisp, clear, and fog-free. TRIPLE-LAYER FACE FOAM - Triple Layer face foam with microfleece facing SEAMLESS COMPATIBILITY - For optimal performance of both helmets and goggles, Giro products are designed to work together, ensuring a seamless interface between helmet and goggle for an exceptional fit and dependable, worry-free function. HIGHLIGHTS - PressFit Lens Interchange System - Cylindrical injection-molded lens - Over-the-glasses (OTG) friendly

The Merino Seamless Long Sleeve Base Layer is the holy grail of base layers. As cozy as your favorite pair of wool slippers, yet it transfers moisture like water going through osmosis. It's the perfect recipe for a cool-weather layer courtesy of its Merino and synthetic fabrics. So, when you need to remain consistently warm on chilly days, look no further than this cool-weather staple. - Merino and synthetic yarns are blended to create a soft, insulating, and moisture-wicking layer, while also retaining a compressive feel. - Fabric Content: 40% Merino Wool, 40% Polyester, 20% Polypropilene

A good pair of tights should be towards the top of your winter riding essentials list, and the RBX Tights are no exception. They were purposefully constructed without a chamois, and the reason is pretty simple. For those who prefer to keep riding in their favorite bib shorts year-round, you're able to simply layer these tights over your shorts for predictable comfort and added warmth. And for anyone seeking out versatility, these tights will be perfect for use in other disciplines like Nordic skiing, running, or snowshoeing. - Articulated design ensures the perfect fit while in the riding position. - Fabric Content: 78% Nylon, 22% Spandex Knit - Four-way stretch fabric provides ample comfort and a soft hand against the skin. - No chamois included in this tight allows you to wear it over your favorite bib shorts or shorts, extending the wearability of this piece when you need the extra leg protection. - Reflective elements increase your visibility to motorists in low-light conditions. - UPF 50+ rating protects your skin from harmful ultraviolet rays.

Modern styling meets all-day comfort with the medium-frame Roam goggle, built with plush fleece facing, Expansion View technology, and anti-fog coating. You'll appreciate the double-layer face foam with microfleece facing, so you'll have a soft feel whenever you're adventuring. As an added bonus, the Roam ships with a second low-light lens, so you'll be ready if the weather quickly changes from sunny to overcast. - Expansion View Technology - OTG-friendly - Frame: EXV frame design - Face foam: Double-layer face foam with microfleece facing - Anti-fog coating

The Holt Jr.'s tough, durable and stylish bombshell construction will withstand any adventure while the dial fit system offers the perfect fit for year-round use. - Bombshell construction - Airflow climate control - 14 vents - All-season use - Adjustable dial fit system - Bombshell ear pads - AirEvac2 ventilation - Removable goggle lock - Self-adjusting lifestyle fit system - Super soft furry tricot lining - AirEvac ventilation - Certification: ASTM F 2040, CE EN 1077:2007 CLASS B, CPSC, CE EN1078

Steel brush. Ø 0.18 mm. Used as first brush on wax after scraping. 5-6 strokes. High quality steel brush that has had an excellent reception in racing.

When you need a little extra protection on a chilly day, reach for the Seamless Roll Neck Long Sleeve Base Layer. Just like our other Seamless Base Layers, it utilizes synthetic yarns to pull moisture away from your body and evaporate quickly to keep a consistent core temperature. Pair that with a roll-neck top, and you're left with plenty of warmth and comfort. - Synthetic yarns are blended to have a soft feel and move moisture away from the skin all while providing the perfect amount of compression. - Stand collar provides an extra layer of protection against the elements. - Fabric Content: 58% Polypropilene, 37% Polyamide, 5% Elastane

A good pair of tights should be towards the top of your winter riding essentials list, and the RBX Tights are no exception. They were purposefully constructed without a chamois, and the reason is pretty simple. For those who prefer to keep riding in their favorite bib shorts year-round, you're able to simply layer these tights over your shorts for predictable comfort and added warmth. And for anyone seeking out versatility, these tights will be perfect for use in other disciplines like Nordic skiing, running, or snowshoeing. - Articulated design ensures the perfect fit while in the riding position. - Fabric Content: 78% Nylon, 22% Spandex Knit - Four-way stretch fabric provides ample comfort and a soft hand against the skin. - No chamois included in this tight allows you to wear it over your favorite bib shorts or shorts, extending the wearability of this piece when you need the extra leg protection. - Reflective elements increase your visibility to motorists in low-light conditions. - UPF 50+ rating protects your skin from harmful ultraviolet rays.

The Holt is built for all-season toughness thanks to its bombshell construction. The proven fit and reliability of the Holt will get you from the park to the backcountry and back. - Bombshell construction - Airflow climate control - 14 vents - All-season use - Self-adjusting lifestyle fit system - Bombshell ear pads - AirEvac ventilation - Removable goggle lock - Certification: ASTM F 2040, CE EN 1077:2007 CLASS B, CPSC, CE EN1078

Perhaps the ultimate fabric combination for a winter glove, the Bigwill Gel insulated glove is made with a softshell upper with DWR treatment, a genuine leather palm (integrating the patented Ergo Air ventilation system) and Biogel padding that strategically varies from 3 to 5mm thick. The two last fingers share a single finger hole in this glove to optimize warmth without compromising any dexterity. Fingertips are reinforced with leather for warmth and protection and reflective highlights have been incorporated to increase visibility in lower light conditions. - Biogel2 padding 3 and 5 mm - Wrist with hook-and-loop fastener for easy adjustment - Insulated with Thermolite-eco (which is made of 35% recycled fibers) 300 g upper hand and 100 g in the palm - Reflective accents

Introducing the LINE Apres Booties 1.0! From the house to the mailbox, to walking the dog around the block, to being grill master through the winter, to scraping off the car, and going to the mountain, these booties will keep your feet toasty warm. A thick layer of Intuition foam in the footbed makes these booties insanely comfortable, and they will even mold to your feet!

Head to the park in style with the ledge™ Mips®, a hard-shell helmet that offers a minimalist look and the added benefit of the multi-directional impact protection system. The Ledge MIPS helmet features a clean, minimalist skate-style design with Hard-Shell Construction built for freestyle and park riding. Under-the-hood muscle meets modern technology with MIPS (Multi-Directional Impact Protection System) for an additional layer of protection, removable Auto Loc 2 Fit System for a personalized fit, and ample venting so you can stay cool when you start working up a sweat. The Ledge MIPS is also modifiable with its removable goggle retainer and earpads. Fit System: The auto loc 2 fit system is a removable, durable self-adjusting fit system designed to take the hassle out of fitting a helmet. A supple elastic fit band at the back of the helmet merges with fixed-position straps, which adjust to cradle your head when you set the system to one of three circumference settings. On-the-fly vertical tuning - accommodates different goggles and head shapes for a custom fit free of gaper gap Features: - Removable Goggle Retainer - Removable Earpads - Compatible with aftermarket Giro audio systems by Outdoor Tech - Seamless Compatibility with all Giro goggles - Compliance: CE EN1077 - Weight: 500g (size medium) Sizes: - S: 52-55.5cm - M: 55.5-59cm - L: 59-62.5cm - XL: 62.5-65cm - *XL size offered in Matte Black and Matte Graphite

Created specifically for charging young groms on the mountain, the Spur™ MIPS® uses the same technologies as giro's adult helmets in youth small and extra-small sizes. The additional layer of protection via MIPS, the capability to dial in the perfect fit with vertical tuning and the in form fit system, and super cool vents that allow for controlled temperature regulation, will have them high-fiving and enjoying every snowy adventure with coolness and excitement. DETAILS FOR CRUISING KIDS The easy-wearing Spur Mips helmet features our finest performance technologies in a lightweight design with added benefit of Mips, the Multi-Directional Impact Protection System. To keep cruising kids comfortable as they follow in your tracks, the Spur Mips also is equipped with the In Form Fit System and Vertical Tuning for a perfect fit that's easy to adjust, a soft interior that feels great against little cheeks, and Super Cool Vents to allow hot air to pass through.

Created specifically for charging young groms on the mountain, the Spur™ Mips® uses the same technologies as Giro's adult helmets in youth small and extra-small sizes. The additional layer of protection via Mips, the capability to dial in the perfect fit with Vertical Tuning and the In Form Fit System, and Super Cool vents that allow for controlled temperature regulation, will have them high-fiving and enjoying every snowy adventure with coolness and excitement. For cruising kids The easy-wearing Spur Mips helmet features our finest performance technologies in a lightweight design with added benefit of Mips, the Multi-Directional Impact Protection System. To keep cruising kids comfortable as they follow in your tracks, the Spur Mips also is equipped with the In Form Fit System and Vertical Tuning for a perfect fit that's easy to adjust, a soft interior that feels great against little cheeks, and Super Cool Vents to allow hot air to pass through. MIPS-EQUIPPED—All Giro helmets are designed to reduce as much energy as possible while meeting and exceeding stringent safety standards. The goal of Giro's Mips-equipped helmets is to reduce rotational forces. Giro believes that helmets equipped with this technology can reduce the amount of rotational force that may be transferred to rider's brain in certain impacts. IN-MOLD CONSTRUCTION—In-Mold Construction fuses a tough polycarbonate outer shell with the helmet's impact-absorbing foam liner. The fusion process allows for better ventilation systems, making in-mold helmets lighter and cooler than traditional helmets. IN FORM FIT SYSTEM—The In Form Fit System makes it easy to dial in a custom fit in seconds—even with gloves on. An ergo-friendly dial at the base of the helmet provides up to 6cm of adjustment and enhanced stability. VERTICAL TUNING—Accommodates different goggles and head shapes for a custom fit free of gaper gap VENTILATION: - Super Cool™ Vents CERTIFICATION: - CE EN1077 CONSTRUCTION: - In-Mold Construction HIGHLIGHTS: - Mips® equipped

Warm, durable mitten for skiing during the colder days of winter. A longer model that’s every bit as comfortable in cold January snow as it is in cold conditions later in the season. Practical polyester fabric protects against the elements, while the goatskin palm provides good grip and increased durability. - Warm, durable mitten - Windproof and breathable polyester fabric backhand. - Impregnated goatskin provides good grip and durability - Removable fleece liner with polyester insulation (Fiberfill). - Attachment for Hestra handcuffs (wrist strap). - Wrist adjustment with one-handed grip. - Snowlock with drawstring adjustment. - Can be combined with various liners. Style #: 31651

Safety, performance & GripWalk compatibility – the SX 4.5 GW CA offers the encouragement and confidence that aspiring young speed champions need to succeed. The SX 4.5 GW CA is a safe, performance driven binding for young skiers of all levels. Featuring super easy handling and the highest safety standards, these bindings guarantee rapid progress for aspiring young speed champions. The bindings also offer precision response, hold and reduced load on joints, creating an easy to ride binding that gives kids the advantage of both agility and safety on the hill. The binding will fit both adult and children ski boots, plus GripWalk and GripWalk Junior ski boots. NEW: an updated heel for an easier entry. - Stand Height: 15mm - DIN: 0.75 - 4.5 - Weight: 1200g Features: - SX Kid Toe with TRP System - Full Diagonal - ISO: 5355A, 5355C, 9523 GripWalk - SX Youth Heel - Brake [K] 80mm Technologies: - Gripwalk: Accommodates all Alpine ski boots (ISO 5355 TYPE A) plus all GripWalk ski boots (ISO 23223 TYPE A). - EASY STEP-IN: Step in and out in seconds without any help. The new shape of the sole lug makes it easier to position the ski boot correctly in the binding. Softer brakes reduce the entry force into the binding by 15%, guaranteeing less resistance when stepping down.

Snagging some boots for the kids can be tough. But this two-buckle boot is easy to slip on and off. So you can spark that love for the mountains in your young one. - Replaceable Outsoles - Easy Entry

Providing security and fun in a package designed for the future of snowboarding, the Lil Kat Binding will boost their confidence while they master their new favorite activity. Easy to use, comfortable, and performance focused, this binding was built for good times and big smiles. The K2 Lil Kat Binding features a 3D Single Strap design with CamLock centering to dial in the perfect fit no matter the size of your shredder's foot. We've added our EZ Feed ratchet funnel to help your little ripper to strap themselves in and out: leading to on-hill independence. 100% Toolless adjustability makes on-the-fly maintenance and fit customization a breeze, and a forgiving Grom Highback ensures that progression and fun are had by all. - Performs best in combination but not exclusively with the K2 Mini Turbo, Lil Kat, or Lil Mini snowboard and Mini Turbo or Lil Kat boot. - Nylon Grom Chassis: Lightweight nylon construction with just the right amount of support. - Grom Highback: Adjustable highback positioning for perfect boot fit and centering on the snowboard. - Single Strap: Quick, simple, and secure for strapping your grom in that they can do by themselves. - 100% Tool-Less Adjustment: Once mounted to your board, all strap and highback adjustments can be done on the fly without the need for screwdrivers or other tools.

Snagging some boots for the kids can be tough. But this two-buckle boot is easy to slip on and off. So you can spark that love for the mountains in your young one. - Replaceable Outsoles - Easy Entry

Head to the park in style with the Ledge Mips, a hard-shell helmet that offers a minimalist look and the added benefit of the Multi-directional Impact Protection System. The Ledge Mips helmet features a clean, minimalist skate-style design with hard-shell construction built for street and park riding. Head to the park in style with the Ledge Mips, a hard-shell helmet that offers our self-adjusting and removable Auto Loc 2 fit system, with the added benefit of Mips, the Multi-Directional Impact Protection System. INTEGRATED MIPS BRAIN PROTECTION SYSTEM - All Giro helmets are designed to reduce as much energy as possible while meeting and exceeding stringent safety standards. The goal of Giro's Integrated Mips-equipped helmets is to reduce rotational forces while enhancing fit and comfort by combining the Mips slip plane with the helmet's adjustable fit system. Giro believes that helmets equipped with this technology can reduce the amount of rotational force that may be transferred to rider's brain in certain impacts. Learn more about Mips in the video above. HARD SHELL CONSTRUCTION - Hard Shell Construction produces great helmets at a great price. A rugged outer shell is molded and then attached to the EPS foam liner. SEAMLESS COMPATIBILITY - For optimal performance of both helmets and goggles, Giro products are designed to work together, ensuring a seamless interface between helmet and goggle for an exceptional fit and dependable, worry-free function. AUTO LOC 2 FIT SYSTEM - Auto Loc 2 is a durable self-adjusting fit system designed to take the hassle out of fitting. A supple elastic fit band at the back of the helmet merges with fixed-position straps, which adjust to cradle your head when you set the system to one of the three different circumference settings. HIGHLIGHTS - Removable goggle retainer - Removable ear pads - Seamless Compatibility with all Giro goggles - Mips® equipped Certifications: - CE EN1077

Designed for touring enthusiast who love exploring the outdoors, this boot provides great comfort and enough grip when walking. Made entirely of 100% PVC FREE, eco-friendly materials, it features a waterproof zipper and lace cover that protect your feet from the snow, while the anatomical touring fit provides great comfort.

Our Atomic Colt 7 GW binding is a junior all-round all-mountain binding. It's Race Kit compatible, GripWalk-friendly, and has a wide DIN range for different levels of skiing. So, if you're stepping up a level and want to feel supremely confident as you line up those groomers, rail slides, and powder fields, the Colt 7 GW binding will be up to it. It also has Automatic Toe Height Adjustment, which adapts to your alpine-normed boot height and ensures constant release values all season long. BINDING ADJUSTMENT VALUE 2 - 7.5 TECH FEATURES - Automatic Toe Height Adjustment - Light Construction - Race Kit Compatible - Automatic Wing Adaptation - Locking Brakes

Stability, direct power transfer and precision ski control – this is the SX 7.5 GW CA binding for junior skiers with progress in mind. The SX 7.5 GW CA for junior skiers is a tech driven bundle of supreme safety and enhanced power transmission for a progressive, confidence building ride. Our SX Junior toe and heels are renowned for their precise boot hold, exact rider-to-ski power transfer and the reduced load on joints of our Full Diagonal release function. Add to this improved kinematics and a 180° vertical and diagonal friction-free boot release and you have a junior binding for confident and fast fun. The binding will fit both adult and children ski boots, plus GripWalk and GripWalk Junior ski boots. NEW: an updated heel for an easier entry. - Stand Height: 21mm - DIN: 2 - 7.5 - Weight: 1400g Features: - SX Junior Toe with TRP System - Full Diagonal - ISO: 5355A, 5355C, 9523 GripWalk - SX Youth Heel - Brake [J] 78 mm Technologies: - Gripwalk: Accommodates all Alpine ski boots (ISO 5355 TYPE A) plus all GripWalk ski boots (ISO 23223 TYPE A). - -EASY STEP-IN: Step in and out in seconds without any help. The new shape of the sole lug makes it easier to position the ski boot correctly in the binding. Softer brakes reduce the entry force into the binding by 15%, guaranteeing less resistance when stepping down.

The NX 7 GripWalk Binding Is a User-Friendly Junior Race Binding. Its lightweight toe piece and NX heel work together to deliver strong power transmission and fluid shock absorption for competitive young racers. The Full Drive Concept toe design allows upward release independent of the heel for the most dynamic release in the event of a fall. The binding's overall lightweight construction makes skiing and carrying skis easier. It's compatible with adult ISO 5355 and GripWalk boot soles. A lightweight, easy step-in design, the NX heel offers maximum ease-of-use balanced with confident retention and downhill performance. Easy Step-In/Step-Out - Intuitive design with wide step-in zone offers easy entry-and-exit. Light Weight - LOOK utilizes composite materials and optimized designs to produce lightweight bindings with the highest levels of retention and release to make skiing and carrying your skis easier, with no compromise in performance or protection. GripWalk GRIPWALK compatible bindings ensure perfect compatibility with two boot sole standards: - Traditional Alpine soles (ISO 5355) - GRIPWALK soles (future ISO 23223 standard) FDC Toe Piece - The FDC toe piece offers a lighter weight design with best-in-class elastic travel and 180° multi-directional release delivering reliable retention and release for confident alpine performance. Multi-Directional Release - LOOK is the only binding brand to develop a true mechanical upward release that functions independently from the heel for the most effective 180° MULTI DIRECTIONAL RELEASE in the instance of a fall. - Brake Width: < 83mm - Weight: 765g 1/2 Pair - DIN/ISO: 2-7

The NX 7 GripWalk Binding Is a User-Friendly Junior Race Binding. Its lightweight toe piece and NX heel work together to deliver strong power transmission and fluid shock absorption for competitive young racers. The Full Drive Concept toe design allows upward release independent of the heel for the most dynamic release in the event of a fall. The binding's overall lightweight construction makes skiing and carrying skis easier. It's compatible with adult ISO 5355 and GripWalk boot soles. A lightweight, easy step-in design, the NX heel offers maximum ease-of-use balanced with confident retention and downhill performance. Easy Step-In/Step-Out - Intuitive design with wide step-in zone offers easy entry-and-exit. Light Weight - LOOK utilizes composite materials and optimized designs to produce lightweight bindings with the highest levels of retention and release to make skiing and carrying your skis easier, with no compromise in performance or protection. GripWalk GRIPWALK compatible bindings ensure perfect compatibility with two boot sole standards: - Traditional Alpine soles (ISO 5355) - GRIPWALK soles (future ISO 23223 standard) FDC Toe Piece - The FDC toe piece offers a lighter weight design with best-in-class elastic travel and 180° multi-directional release delivering reliable retention and release for confident alpine performance. Multi-Directional Release - LOOK is the only binding brand to develop a true mechanical upward release that functions independently from the heel for the most effective 180° MULTI DIRECTIONAL RELEASE in the instance of a fall. - Brake Width: 83 - 93mm - Weight: 770g 1/2 Pair - DIN/ISO: 2-7

With an emphasis on warmth and comfort, the Speedmachine J1 helps children fall in love with skiing. Its three-piece design makes it especially easy to put on and take off. And by providing significant support, it positions children in a neutral stance that enhances control and stability. To keep feet warm, dry, and comfortable, the boot features a plush, insulated liner. Rather than an afterthought, the Speedmachine J1 is carefully designed to inspire confidence and help children progress.

Snagging some boots for the kids can be tough. But this three-buckle boot is easy to slip on and off. So you can spark that love for the mountains in your young one. - Replaceable Outsoles - Easy Entry

The J-Green Ski Boots, perfect for young beginner skiers, offer unmatched sustainability and comfort. Featuring a recycled shell and liner, these fully recyclable boots ensure easy entry and exceptional comfort. Pre-fitted GripWalk Junior soles provide enhanced grip and make walking easier and safer. Ideal for young skiers starting their adventures on the slopes! Introducing the revolutionary J-Green Ski Boots, a lightweight and environmentally cutting-edge choice for young skiers. The shell and liner of the J-Green are made entirely from recycled materials, ensuring the entire boot can be completely recycled. The single aluminium buckle closure, optimized fit, and comfy liner with thermal insulation make the J-Green easy to get on and off, offering just the right amount of flexibility to make skiing fun for the very youngest adventurers. Standard GripWalk soles provide enhanced comfort and reduce slipperiness, making walking easier and safer. Embrace sustainability and comfort with the J-Green Ski Boots, designed for the next generation of skiers.

The J-Green Ski Boots are part of Dalbello’s Reboot project, offering one of the most sustainable choices for young skiers. With a two-buckle design, these boots feature a shell and liner made almost entirely from recycled materials and are fully recyclable. Easy to get on and off, the J-Green provides great flexibility and pre-fitted GripWalk Junior soles for enhanced grip and easier walking. Perfect for young adventurers starting out on the slopes! Introducing the revolutionary J-Green Ski Boots, a top choice for young skiers seeking both performance and sustainability. These lightweight, environmentally cutting-edge boots feature a shell and liner made entirely from recycled materials, making them fully recyclable. The two aluminium buckles and stiff build provide excellent stability, direct power transmission, and firm foot support. With an optimized fit and a comfortable liner featuring thermal insulation, kids can enjoy skiing all day long. The pre-fitted GripWalk soles ensure safer and more comfortable walking, making the J-Green Ski Boots perfect for young adventurers ready to hit the slopes with confidence and eco-consciousness.

Inspired by giant mountain landscapes and stylish smooth turns, the Neo Jr. Mips helmet's distinct design lines and comfortable features give kids the confidence they need. From pizza to french fry, the Neo Jr. Mips helmet's removable ear pads, adjustable venting, and fit system gives kids the comfort they're looking for. The Neo Jr. Mips helmet is a versatile design offering lightweight comfort, kid-approved style and the Multi-Directional Impact Protection System (Mips), a slip-plane liner that can provide more protection in certain impacts. The In Form Fit System assures a secure fit while adjustable venting regulates airflow to help keep goggles fog-free. It's no wonder The Neo Jr. Mips is one of our most popular kids helmets. INTEGRATED MIPS BRAIN PROTECTION SYSTEM - All Giro helmets are designed to reduce as much energy as possible while meeting and exceeding stringent safety standards. The goal of Giro's Integrated Mips-equipped helmets is to reduce rotational forces while enhancing fit and comfort by combining the Mips slip plane with the helmet's adjustable fit system. Giro believes that helmets equipped with this technology can reduce the amount of rotational force that may be transferred to rider's brain in certain impacts. Learn more about Mips in the video above. HARDSHELL WITH IN-MOLD HARDBODY LOWER WRAP - The two-piece shell combines a tough outer hard shell with a polycarbonate lower shell permanently fused to the liner for durability without excess weight. SEAMLESS COMPATIBILITY—For optimal performance of both helmets and goggles, Giro products are designed to work together, ensuring a seamless interface between helmet and goggle for an exceptional fit and dependable, worry-free function. STACK VENT TECHNOLOGY - Our Stack Vent was developed based on research showing the majority of warm air that can cause fogging comes from the goggle's center top vent. Aligning the Stack Vent in the helmet with the center vent of the goggle helps keep it clear and fog-free. THERMOSTAT CONTROL - Thermostat Control Adjustable Venting allows you to custom-tune airflow instantly with a simple, low profile control button on the outside of the helmet. No other system is faster or easier to adjust, and nothing is more effective at keeping you comfortable. IN FORM FIT SYSTEM - The In Form Fit System makes it easy to dial in a custom fit in seconds—even with gloves on. An ergo-friendly dial at the base of the helmet provides up to 6cm of adjustment and enhanced stability. VERTICAL TUNING - Accommodates different goggles and head shapes for a custom fit free of gaper gap HIGHLIGHTS - Removable ear pads - Seamless Compatibility with all Giro goggles - Mips® equipped Certifications: - CE EN1077

With one eye focused on durability and the other locked in on warmth and comfort, the Lil Kat Boot will help to keep a smile on their face and their feet strapped in all day long. Packed full of tech and features as our adult boot collection, the Lil Kat girls snowboard boot gives your grom the confidence to anything you put in front of them. This philosophy is proven with features like the Youth BOA® Fit System, allowing your grom to get the perfect fit from their boots with the effortless twist of a dial. Inside, the K2 Lil Kat liner is warm and breathable and can be custom fit to any foot shape. It also features internal J-bars that hug the ankles for a supportive and responsive fit. We've placed our Grows-A-Long shim system there, allowing you to add or subtract sizes for a perfect fit during mid-season growth spurts. *Performs best in combination but not exclusively with the K2 Mini Turbo, Lil Kat, or Lil Mini snowboard and Mini Turbo or Lil Kat binding. - Youth BOA Fit System: Simple and secure shell lacing that tightens with a twist of the Youth BOA Dial. - Bright Futures Outsole: Durable and grippy rubber outsole that lights up with each step or S-turn your grom makes. - Die-Cut EVA Grows-A-Long Shims: A set of three EVA shims that can be added or removed from the boot for multi-season use as your grom grows.

Marker's Junior bindings offer high-level features like the 4-linkage toe and compact heel to the very youngest of skiers. In addition to top-level retention/release technology, Marker junior bindings also provide seamless compatibility for use with Dalbello's ski boot models featuring GripWalk, to allow young skiers a better experience and more comfort while walking around the resort. COMPACT HEEL - A statement of efficiency - with the usual perfect MARKER release properties and the perfect mix of great design, lightness, and excellent functionality. This heel technology is perfect for beginners and occasional skiers due to the release properties and is an excellent value. BIOTECH - During a backward twisting fall both horizontal and vertical forces are triggered on the toe of the binding. Biotech recognizes this unfavorable force combination and reliably reduces the release force.

Inspired by Oakley’s first true oversized snow goggle, Canopy, the new Flight Tracker has a classic, stylized shape, and an oversized full-rim toric design with an optimized field-of-view in all directions. With large, medium, and small sizes, Flight Tracker will fit a wide variety of faces and is engineered to integrate perfectly with most helmets.

The Giro Method goggle, new for the 2020 season, has your top needs covered: crisp visibility, comfort, and of course style. First and foremost, the Method boasts a wide field of view and the best lens tech in the business thanks to a VIVID lens with Optics by ZEISS. EVAK Vent Technology keeps fogging in check even on the steamiest of efforts and the Method’s triple layer face foam with microfleece facing provides all day comfort. Right away you’ll notice the Method’s clean and modern lines; and you’ll be stoked to know it’s a look you can personalize even more, as the Giro Method is Adapt Strap compatible.

The Mirage combines single-zone adjustable venting with lightweight in-mold construction for a helmet experience that is reduced down to just what you need for a day on the hill. The dial-fit system and cozy long-fleece liner ensure that you are comfortable and warm. The Mirage exemplifies our belief that every detail should be considered. MIPS Technology MIPS is used to reduce the rotational forces to the brain in the case of an oblique impact. Smith helmets are created to absorb direct impacts very efficiently and when combined with MIPS, Smith helmets absorb oblique forces better by allowing a small rotation of the outer shell relative to the liner. When you fall to the ground at an angle, rotational forces are generated. A helmet integrating MIPS technology creates a sliding layer between the outer shell and the head. This allows the helmet's outer shell to slide relative to the head when hitting the ground, so the rotational force is decreased, reducing the potential to damage your brain. - Lightweight in-mold construction - Aerocore construction featuring Koroyd - Regulator adjustable climate control - 14 vents - Adjustable dial fit system - Super soft furry tricot lining - Snapfit SL earpads - AirEvac ventilation - Certification: ASTM F 2040, CE EN 1077:2007 CLASS B

Inspired by giant mountain landscapes and stylish smooth turns, the Neo MIPS Helmet's distinct design lines provide a unique visual identity while encapsulating the two-polycarbonate components of the helmet. It has been carefully crafted and introduced to the line to offer styling differentiation and elevated quality for riders of all abilities. The Neo MIPS Helmet is the new foundation in the Giro helmet line and an instant classic. The Neo MIPS benefits from a lightweight In-Mold Construction and features the dialed-in fit of the In Form Fit System with Vertical Tuning. On the mountain, it's easy to go from hot to cold, so you'll appreciate the on-the-go temperature control, which is achieved through the Thermostat Control adjustable venting and fog-free Stack Vent. Embrace the peak and withstand the wintery elements with the protection of the Neo MIPS helmet, which offers more protection in certain impacts by redirecting impact energy. - MIPS - In-Mold Construction - In Form Fit System - Thermostat Control - Stack Vent Technology - Seamless Compatibility - Electronics Compatibility: Compatible with Aftermarket Giro Audio Systems by Outdoor Tech - Certification: CE EN1077