Shop Snow Sports

Transparent polyethylene sticks for repairing ski bases. Easy to work with. Ø 6 mm. 4 sticks per pack. First clean the damaged area in the base and scrape out any loose residue. Heat the polystick and drip into the damaged area in the base. Let it cool down and scrape away the excess with a steel scraper, or panzer file if necessary, and polish over with Fibertex for a fine finish. - Polyethylene Stick - For repairing ski bases - For racing service and ski workshops - Easy to work with

Natural cork for polishing Cera F and glide wax. Used to cork wax into the base.

It is important that the scraper is sharp at all times. This makes it easy and effective to work on the base surface. The less sharp the scraper is, the more pressure is required. This may negatively affect the properties of the base. Sharpen the scraper using Swix T0408, T410 and T412-220.

Steel scraper for experienced waxers. Sharp steel scraper for peeling or straightening bases.

Roof rack security or apres ski piece-of-mind, the Micro Lock provides gear security in a pocket-size package. Built from the same bomber materials as the larger Cool Lock, the Micro features a 30-inch cable and three-digit combo lock. Just enough security to offer a peace-of-mind for your unattended skis or board. - Compact 3-digit combination lock with 30-inch [ 76cm ] retractable cable - Set your own combination

PS10 is an economic training and racing wax as well as base prep wax for warm skis. Easy to melt and very convenient to work with. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. It's important to have a good iron to get an efficient melting of the wax. Recommended iron temp: 120°C (248°F). - A versatile wax for warm conditions - Low melting point and easy to apply

The PS5 is the hardest wax in the line, and is a great choice in cold conditions, due to its great durability and dry friction properties. It's a great choice both for alpine and cross country. Despite being a wax for cold conditions, the melting point makes it easier to apply than many competitors in this area, without sacrificing the great glide properties. For fresh, old, or manmade snow. The speed of the iron should be approx. 8-10 sec. on a skating ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Scraping after appr. one minute. Important to have a good iron to get an efficient melting of the wax. PS5 can be used as a race wax alone or as a base for top coats. Recommended iron temp: 150°C (311°F) - Recommended iron temp: 150°C (311°F). - Replaces the CH5X. - -10°C to -18°C (14°F to 0°F).

PS6 is very versatile. Its area of use stretches from underlayer for powder to racing wax and base prep wax for cold skis. PS6 has good durability and offers great performance on natural and artificial snow. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Important to have a good iron to get an efficient melting of the wax. PS6 can be used as a race wax alone or as a base for powders and other top coats. Recommended iron temp: 145°C (293°F). - Recommended iron temp: 145°C (293°F). - Replaces the CH6X - -6°C to -12°C (21°F to 10°F).

PS7 is a wax that performs great in normal winter conditions below the freezing point. Its hardness makes it convenient to work with and easy to get a good end result. PS7 is an economic training and racing wax as well as an all-round base prep wax. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. It's important to have a good iron to get an efficient melting of the wax. Recommended iron temp: 140°C (284°F). - Recommended iron temp: 140°C (284°F). - Replaces the CH7X. - -2°C to -8°C (28°F to 18°F).

PS8 is an economic training and racing wax as well as base prep wax for warm skis. Easy to melt and very convenient to work with. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. It's important to have a good iron to get an efficient melting of the wax. Recommended iron temp: 130°C (266°F). - Recommended iron temp: 130°C (266°F). - Replaces the CH8X. - -4°C to +4°C (25°F to 39°F).

The Kids' Wintersport Full Cushion Yeti Pattern Over The Calf Socks are the perfect winter accessory for the tiny adventurer in your life. This cozy Merino wool sock features a playful yeti design, full cushion, and a flat knit toe seam for additional comfort. With these over-the-calf socks on their side, they can focus more on exploring and less on staying warm. - Made in USA - Over-the-Calf - Full Cushion

F4 universal liquid glide wax for skis and snowboards. A wax with a wide range of uses. - Universal wax for all temperature ranges - Glide wax for ski mountaineering and summer skiing - Preservative wax for metal edges - Easy application

Effective ski cleaner for removing grip wax and klister. - Ski clean aerosol with applicator - For cleaning skis - For ski waxers - Removes grip wax and klister

Get them ready for a full day of exploring in the Kids' Wintersport Full Cushion Polar Bear Pattern Over The Calf Socks. This cozy Merino wool sock features a playful polar bear design, full cushion, and a flat knit toe seam for additional comfort. Snow days just got a little warmer and a lot more fun. - Sock Height: Over-the-Calf - Sock Cushion: Full Cushion - Full cushion in leg and foot - Flat knit toe seam for additional comfort

No cushion. All performance. Our thinnest Merino wool ski socks are the perfect pairing for your tight-fitting ski boots, and still offer you the all-day comfort you need to stay out longer. Featuring our most loved sock technologies for an enhanced fit and durability, our Ski Zero Cushion Over The Calf Socks are everything you need to help take care of your feet and stay focused on the runs ahead. - 4 Degree Elite Fit System, Indestructawool Technology, Made in USA, Shred Shield Technology - Over-the-Calf - Zero Cushion

When a crew sock is too little, but a padded knee-high is too bulky—Flyweight is juuust right. Rocking all the bells and whistles that make our MTN Tech build so epic, this knee-high black TurboWOOL sock is only lightly padded in the light charcoal shin pad to protect you from tight boots on the slopes, or poison ivy on the trails. The perfect sock for any adventure. Product Features: - TurboWool blend base is 5x stronger than merino wool alone. - Shrink-resistant for long-lasting quality. - Itch-free Insulation (warm in winter; cool in summer) - Superior moisture-wicking to keep feet bacteria-free. - Mesh upper for ultimate airflow. - Arch support so they stay put on your foot. - Mesh upper for ultimate airflow. - Articulated ankle support keeps them facing front. - Unique Stretch-to-Fit sizing system for a perfect fit on a wide range of foot sizes. - Double-stitched nylon heel & toe for durability and longevity. - Off-beat, original designs only SockGuy can provide! - Cuff Height : Knee-High - Made with : TurboWool - Style : Extra Padding

When a crew sock is too little, but a padded knee-high is too bulky—Flyweight is juuust right. Rocking all the bells and whistles that make our MTN Tech build so epic, this knee-high red TurboWOOL sock is only lightly padded in the charcoal shin pad to protect you from tight boots on the slopes, or poison ivy on the trails. The perfect sock for any adventure. Product Features: - TurboWool blend base is 5x stronger than merino wool alone. - Shrink-resistant for long-lasting quality. - Itch-free Insulation (warm in winter; cool in summer) - Superior moisture-wicking to keep feet bacteria-free. - Mesh upper for ultimate airflow. - Arch support so they stay put on your foot. - Mesh upper for ultimate airflow. - Articulated ankle support keeps them facing front. - Unique Stretch-to-Fit sizing system for a perfect fit on a wide range of foot sizes. - Double-stitched nylon heel & toe for durability and longevity. - Off-beat, original designs only SockGuy can provide! - Cuff Height : Knee-High - Made with : TurboWool - Style : Flat-knit; Standard

No one likes wet boots and socks! The Tubbs full length nylon gaiters provide protection from the elements by keeping snow out of your boots and off of your pants. Water-resistant and breathable, these gaiters keep your feet comfortable and dry on those cold, wet winter hikes.

No one likes wet boots and socks! The Tubbs fulllength nylon gaiters provide protection from the elements by keeping snow out of your boots and off of your pants. Water-resistant and breathable, these gaiters keep your feet comfortable and dry on those cold, wet winter hikes.

Whether your blind date on the mountain didn't go too well, you're trying to hide from the in-laws on the annual ski trip, or you're avoiding the yellow coats after skiing a little too fast, we've got you covered. Not only will the Heist Ski Mask keep you warm, it doubles as a disguise in the moments you need it most.

The Electra Jr Pink Pole features a durable aluminum shaft that balances strength and weight for all-around skiing. Its juniors'-specific grip has a smaller circumference for a secure, comfortable feel.

Complete kit for maintenance of steel edges. Takes down the side edge to 88 or 87 degrees. Contains practical file guide in pocket format with file, diamond grindstone for polishing, coarse grindstone for removing hardened steel, and ski brake retainers.

You don't need to be daring or reckless to appreciate a full view of the run ahead. The Smith Daredevil goggles bring over-the-glass fit to kids' goggles. Our floating foam design eliminates eyeglass temple pressure for a distraction-free fit, and a semi-rimless design maintains a wide field of vision. Treat your aspiring freerider to enhanced depth perception and increased contrast for a true view of every wind lip, glade, and powder stash. - Cylindrical carbonic-x lens - Fog-X anti-fog inner lens - Youth fit - medium - Dual-slide strap adjustment system - 2-layer DriWix face foam - Helmet & eyeglass compatible - Floating foam membrane eliminates eyeglass temple pressure - Silicone-backed strap - Includes microfiber goggle bag

Protects the wax base during transport and is easy to prepare for the next training session. A versatile hard glide wax. Used by Racing Service and ski factories as a transport wax and as an effective preparation for the next summer snow training session. - Easy to apply with a waxing iron. - Easy to scrape and brush. - Fluoro-free

Protects the wax base during transport and is easy to prepare for the next training session. - Wide range of applications, 0°C to -10°C. - Easy to apply with a waxing iron. - Easy to scrape and brush. - Fluoro-free

Available in various colors, the Atomic Cloud ski pole is the entry model for female skiers with an eye for style. This lightweight aluminum pole combines the cool look of our Cloud skis with our Ergonomic AMT Grip designed for all-mountain skiing – with special ridges for an improved grip and a 60mm piste basket. TECH FEATURES - 3* Aluminum Pole Technology - Piste Basket (60mm) - Ergonomic AMT Grip (1K) - Essential Strap - Piste Basket (60mm) - Steel Tip - Ergonomic M-Fit

Available in different color combinations, the Atomic AMT is a seriously hardy ski pole with a 60mm piste basket and our Ergonomic AMT Grips – designed for all-mountain skiing with special ridges for an improved grip. The pole itself is made from a lightweight aluminum alloy, keeping it looking great and performing perfectly year after year. TECH FEATURES - 3* Aluminum Pole Technology - Ergonomic AMT Grip (1K) - Essential Strap - Piste Basket (60mm) - Steel Tip - Ergonomic M-Fit

From corduroy groomers to fast laps in the mini-park, kids will be able to count on the Buster's many features. And, with so many color and graphic options to choose from, the only hard part might be figuring out which option to go with. DETAILS BIG KID STYLE Help your little shredder learn the ropes of the slopes when they wear the new Buster goggle. They'll love the look and feel of these stylish mid-sized frames, and the cylindrical injection-molded lens with Expansion View Technology deliver clear and wide vision all season long. The Buster's triple-layer face foam with microfleece facing delivers remarkable comfort while also safeguarding them from wind and cold.

Practical Waxing Iron Holder for mounting on to waxing table or workbench (max. 40 mm). Reduces the risk of dropping a valuable iron on floor. Fits all SWIX Irons.

The women's Electra White Pole features a durable aluminum shaft that balances strength and weight for all-around skiing. The women's-specific, vibration-dampening grip features a smaller circumference for a secure, comfortable feel. Strong and Lightweight Aluminum dural shaft is light and durable Comfortable Grip Women's-specific, vibration-dampening grip with a smaller circumference for a secure feel