Bells/Noise Makers

- 115 decibel horn with volume control switch - Mounts to most handlebars - Air reservoir is easily refilled with any bike pump - no batteries needed - Extension allows for more versatility when mounting

- 120db electronic rechargeable bicycle horn with remote - USB 280mAh rechargeable battery charges in 1.2 hours and lasts approximately 30 days or 2500 uses - Charging indicator light shows red when charging, and green when fully charged - IP65 water and dust proof - Compatible with 22.2 - 31.8mm handlebars - Whistle, horn, and alarm sounds

Timber 3.0 is a solid brass bell with a sleek black finish and a crisp, clean sound. If you find yourself using your bell on nearly every ride, then the Bolt-On model is the one for you. The Timber 3.0 Bolt-On is identical to the original model, except it features a tight, durable mount that won't spin, shake or rattle on your bars. Similar to a GPS or Garmin mount, the flexible nylon band tightens to your bars with a 5mm hex bolt. The band itself is 31.8mm diameter, the same as the wider part of your bars near the stem. It also includes a flexible 22.2mm shim for mounting your bell securely near your grips, closer to your hands (you'll want to use this setup for oversize and DH bars). - Installation is easy. There is no need to remove the grips, brakes, etc. Just flex the clamp open and slide onto your bar. - Upgraded version has a slimmer profile on your handlebars, smoother shifting between ring modes, and we've beefed up the strength of the internal clapper cable and the lever handle for longer life.

- Uses one 9v battery (not included) - Fits most handlebars

Announce your presence with Portland Design Works' Alexander Graham Bell. Built to replace a 10mm 1 1/8 headset spacer, this bell is a classy addition to your rig without sacrificing any of your precious handlebar real estate. - Polished brass bell  - Replaces a 10mm 1 1/8" headset spacer - Quick-reflex alloy clapper - Lifetime PDWarranty

Coming in hot! This limited edition King of Ding II is laser-engraved "COMING IN HOT." Perfect for speed demons, messengers, cat6 champions, and anyone else who "can't stop, don't want to." The bell is made of solid brass and comes equipped with a brass striker for a loud clear ring that's sure to clear the path. The alloy mount is easy to install and fits 22.2 – 25.4mm handlebars.

Announce your presence with Portland Design Works' King Of Ding II Bell. This solid brass bell rings loud and clear. - Solid brass bell - Brass striker - Alloy mounting - Fits 22.2 - 25.4mm handlebars

- Durable all steel trigger bell - Floral feminine pattern - Bell diameter: 80mm

- Stylish bike accessory for your bike through beautiful bohemian print. - Makes a resounding ding dong sound.

The Basil Portland Bell Brass makes an instant impression. The timeless silver finish ensures an easy complement to almost any bicycle frame, while the bell itself is easily mounted to your frame, with no complex installation to worry about. When rung, this bell emits an audible sound that’s loud enough to alert other cyclists, motorists and pedestrians of your presence.

Let other cyclists and pedestrians know you're there by ringing your Planet Bike Courtesy Bell Classic. This bell has a striker that rotates 360 degrees so you can place it wherever you need it for easy access. And it fits on handlebars with diameters from 22.3 to 26mm.

Our Trail Bell announces your presence while letting you keep both hands firmly on your grips and goes silent with just the flick of a switch. Fits all handlebars from 22.2 to 31.8mm.

Available with either polished brass or chrome plated dome. Striker can be adjusted for individual comfort. - Dome Diameter: 45mm (1.7") - Fits handlebars with 22mm – 25.4mm (.86" – 1") outside diameters

Let everyone know your coming with Sunlite's Ding Dong Bell. It makes the classic "ring-ring" sound that everyone loves. It fits most bars and can be used right or left handed.

A new angle on bells. Low and lean looking; very techy too. - Fits handlebars with 22.7mm – 26mm (.0.89" – 1.02") outside diameters

Keep valuable handlebar space free with Mirrycle's Incredibell Striker Bell. It integrates into the top cap of the headset, can be mounted any way you choose, and features an adjustable dinger as well. A flick of your finger and the Striker Bell rings loud and clear for all to hear. - Dome Diameter: 45mm (1") - Weight: Black and silver: 36g (1.3oz); Brass: 68g (2.4oz)

Mirrycle's Incredibell Brass Duet makes a traditional ding-dong dual-tone ring with the beautiful resonance of solid brass. Plus, its compact size lets you mount it just about anywhere on your handlebars. - Dome Diameter: 33mm (1.3") - Fits handlebars with 21.7mm – 24mm (.86" – .95") outside diameters

Mirrycle's Incredibell Brass Duet Colors makes a traditional ding-dong dual-tone ring with the beautiful resonance of solid brass. Its compact size lets you mount it just about anywhere on your handlebars. And, the bell's vibrant colors add a splash of personality to any bike. - Dome Diameter: 33mm (1.3") - Fits handlebars with 21.7mm – 24mm (.86" – .95") outside diameters

•Parrot Pirate •Fits most handlebars •Easy installation

Origin-8's Ping Multi-Fit features a compact design and a multi-fit, no-tool mount.

Origin-8's Time Clock Bell provides a wonderful sound and adds a touch of class to your handlebars. This great 55mm bell delivers the wonderful resonate sound of brass with all-metal mechanical parts.

Dimension Bulb Horns offer classic style and personality. - 9 inches in Length

Accessorize your bike in a way that announces your presence in style. The omni-directional rotating top produces a clean, clear, loud ring. - Fits handlebars with 22.2mm - 31.8mm (.87-inch - 1.25-inch) outside diameters - Dome Diameter: 44mm (1.6")

Let other cyclists and pedestrians know you're there by ringing your Planet Bike Courtesy Bell. This minimal bell has a striker that rotates 360 degrees so you can place it wherever you need it for easy access. And it fits on handlebars with diameters from 22.3 to 26mm.

- Great novelty horn - Fits most handlebars

Powder-coated black brass bell that produces a loud, clear, and pleasant sound to alert pedestrians. - Split clamp allows the bell to be installed anywhere on the handlebar without removing grips or shifters. - Fits 22.2 to 28.6mm handlebars - Size: 35mm - Material: Brass

The Omnibell has an adjustable band clamp. Its ingeniously designed dinger can be rotated to any position. This gives you flexibility in mounting the bell anywhere on your handlebar, making it very convenient to use either your thumb or another finger to ring the bell. Dome Diameter: 34mm (1.34") Fits handlebars with 22mm – 31.8mm (.87" to 1.25") outside diameters

The Mirrycle Jellibell is a fun way to let pedestrians and other riders know you're coming! The Jellibell has a see-through top so you can see the gears spin as it rings. It's weatherproof, too! - Dome Diameter: 48mm (1.9") - Fits handlebars with 21mm – 22.5mm (.83" – .89") outside diameters

- 65mm Bell in the form of a bacon cheese burger - Adjustable handlebar mount - Universal nylon mount - Ringer style mechanism - Function: Lever

•Classic Straight design •Clamp fits most handlebars •10" length